Input Shaft Speed is available on Channels DI 1- 8 on the KV Series and DI1-4 on the SL Series. The units are RPM.


See Speed Settings for information on sensor setup.


Input Shaft Speed Calculation 


With 0% Clutch Slip, for the Input Shaft RPM to match the Engine Speed the Scaler should be calculated as follows:


Scaler =                  60                    

             Number teeth on Input Shaft


Example1:  4 teeth on the Input Shaft


Scaler = 60 / 4 = 15.00


Example1:  7 teeth on the Input Shaft


Scaler = 60 / 7 = 8.57