Gear Detection Setup

Gear Position Enable

Enables the Gear Detection

0 = OFF

1 = ON

Gear Position Calculation

Choose the method of Gear Position Calculation

Various modes are available.

0 = Gear Position Voltage 1 - Input must be assigned and calibrated

1 = RPM/Speed Ratio - Gear is derived by RPM/speed channel defined (Under Gear Position RPM/Speed Setup)

2 = CAN Bus - Gear is received over CAN bus

3 = Inputshaft/Outputshaft Ratio - Gear is derived by calculating ratio of inputshaft/outputshaft speed

4= Gear Position Voltage 2 - Input must be assigned and calibrated