User Torque Limits 1-5

In addition to Motorsport and special features included in the firmware that utilize Torque Management (Launch Control, Traction Control, Engine Speed limiting), there are furthermore 5 User Configurable Torque Limits. 

User Torque Limit Function Setup

The User Torque Limits must be enabled in the Function Output Setup

Furthermore, a Custom Label can be assigned to the function

Torque Limit Control Setup

Choose Strat to use for each Torque Limit

Choose Target Gear for Normalised Torque target

Example Below : (Gear Ratio Table MUST be setup)

1 = 3.266

2 = 2.130

3 = 1.517

4 = 1.212

5 = 0.972 

6 = 0.780

Normalised gear = 2 which is Ratio 2.130

Feedforward Torque = 300Nm

Torque Target :

Gear 1 = 2.130/3.266 =  0.652 * 300 = 195.7Nm

Gear 2  = 2.130/2.130 = 1 * 300 = 300Nm

Gear 3 =  2.130/1.517 = 1.404 * 300 = 421.22Nm

Select Tq Limit User Enable

User Torque Limit Main Table (Nm)

This entry value in Nm is the torque target when the limit is active. 

User Torque Limit Correction Table (%)

This entry will compensate the torque target table.  Values entered are +/- %