Injector Driver Setup

The Injector Driver Setup is where the injector driver output is configured.

For High Impedance or Saturated injectors the Saturated setting should be used

KV based ECU's also have the ability for user defined Peak and Hold setting.

Peak & Hold refers to low impedance injectors that require significantly more current to run correctly

Peak and Hold Examples:

Peak Current = 4A

Peak/Hold Ratio = 4. This gives 4A/4 = 1A Hold Current

Peak Current = 6A

Peak/Hold Ratio = 6. This gives 6A/6 = 1A Hold Current

Peak Current = 6A

Peak/Hold Ratio = 1.5. This gives 6A/1.5 = 4A Hold Current

The Custom setting allows for individual injector channel setup